You need far less than a craft-store aisle suggests. To stitch your first hoop you need six things: a hoop, a piece of woven fabric, embroidery floss, an embroidery needle, small scissors and a way to put the design on the fabric. Everything else is optional until you know what kind of embroidery you enjoy.
Below is the checklist I’d hand anyone starting out, with the sizes and types that make the first project easier, plus the extras that are worth adding later.
The short checklist
- A 6-inch (15 cm) wooden or bamboo hoop with a screw closure
- A fat-quarter-sized piece of tightly woven cotton or cotton-linen fabric
- 6 to 10 skeins of six-strand cotton embroidery floss
- A pack of embroidery (crewel) needles, sizes 5–10
- Small, sharp embroidery scissors
- A water-soluble marking pen (or another transfer method from the list below)
1. Embroidery hoop
A hoop holds the fabric tight so your stitches lie flat instead of pulling the fabric into puckers. For a first project, a 5- to 7-inch hoop is the easiest size to hold in one hand and still fits a full small design. Six inches is a good middle.
Wooden and bamboo hoops with a metal screw at the top are inexpensive and grip fabric well. Plastic hoops with a spring or a lip are fine too. If your fabric keeps slipping, wrap the inner ring with cotton twill tape; it adds grip and protects delicate fabric from ring marks.
Before you start stitching, tighten the screw and gently pull the fabric edges until the surface feels drum-tight when you tap it.
2. Fabric
Choose a tightly woven, non-stretch fabric in a light or medium weight. Quilting cotton, a cotton-linen blend or a plain linen are all easy to work on. Avoid knits and stretchy fabric for your first project; they warp in the hoop and need a stabilizer behind them.
Cut your piece at least 2 to 3 inches (5–8 cm) larger than the hoop on every side, so there’s enough fabric to grip and to finish the back neatly later. If the finished piece will be washed (a tote bag, a shirt), wash and iron the fabric first so it doesn’t shrink under your stitches.

3. Embroidery floss
Standard six-strand cotton embroidery floss is what most patterns are written for. Each skein is made of six thin strands twisted together, and you separate them to change how thick your line looks. Two or three strands give a clean outline; all six give bold, filled shapes.
You don’t need a 100-color box. Start with 6 to 10 colors that suit the design you want to stitch: a dark outline color, two or three greens for leaves, and a few flower or accent colors. Pull strands out one at a time and then put them back together; that keeps the thread from twisting and knotting.
Later you might try pearl cotton (a single, thicker, shiny thread that doesn’t separate) for bold lines or sashiko thread for running-stitch patterns.
4. Needles
Look for embroidery needles, sometimes sold as crewel needles. They have a sharp point and a longer eye that makes floss easier to thread. A mixed pack in sizes 5 to 10 covers most work. Higher numbers are finer: a size 7 or 8 is comfortable for two or three strands of floss.
Two other types are useful later: chenille needles (sharp with a large eye, for thicker thread and wool) and tapestry needles (blunt, for counted work on Aida cloth).
5. Scissors
Small, sharp embroidery scissors with fine tips let you trim threads close to the fabric without nicking it. Keep a separate larger pair for cutting fabric, and don’t use either one on paper, which dulls the blades quickly.
6. A way to transfer the design
How you get the pattern onto fabric depends on what you’re stitching on:
- Light-colored fabric: place the pattern behind the fabric against a sunny window or a light pad and trace it with a water-soluble pen. The marks rinse out in cool water when you’re done.
- Heat-erasable pens disappear with an iron, but the lines can reappear in the cold and may leave faint marks on some fabrics. Test on a scrap first.
- Dark or textured fabric, and clothes: print or trace the design onto water-soluble stick-and-stitch stabilizer, stick it on, stitch straight through, then rinse it away.
- Carbon transfer paper made for fabric works on most surfaces but the lines can be hard to remove, so keep them inside your stitching.
If you’d rather skip drawing altogether, these printable beginner patterns are designed to be traced.

Nice-to-have extras (add these later)
| Item | What it helps with |
|---|---|
| Floss bobbins and a box | Keeps colors untangled and labeled |
| Needle threader | Threading several strands through a small eye |
| Needle minder (a small magnet) | Parks the needle on the fabric between steps |
| Thimble | Pushing the needle through thick fabric like denim |
| Stabilizer (iron-on or tear-away) | Embroidering on t-shirts, sweatshirts and other stretchy fabric |
| Felt and glue or a running stitch | Finishing the back of a hoop for display or a gift |
Three habits that save your first project
- Keep the fabric drum-tight. Loose fabric is the main cause of puckering. Re-tighten the hoop whenever it starts to sag.
- Use shorter thread. A length of roughly 18 inches (45 cm), about from your fingertips to your elbow, tangles much less than a long piece.
- Learn three stitches first. Back stitch, stem stitch and French knots will get you through most beginner patterns. My guide to basic embroidery stitches shows them in order, and these one-stitch-at-a-time tutorials help you practice each one.
Common questions
Do I need a kit, or should I buy supplies separately?
A kit is a good choice if you want everything matched to one design, including the pattern already printed. Buying separately makes more sense if you already know what you want to stitch, or you want to embroider on clothes rather than in a hoop.
What size hoop is best for a beginner?
Between 5 and 7 inches. Smaller hoops are easy to hold but limit the design size; larger ones are harder to keep tight and tire your hand.
Can I use sewing thread instead of embroidery floss?
You can, but regular sewing thread is much thinner, so lines look faint and filling an area takes a long time. Floss is designed for embroidery and gives you control over line thickness.
What fabric should I avoid?
Stretchy knits, very loose weaves and slippery fabrics such as satin are the hardest to start with. If you want to stitch on a t-shirt or hoodie, use a stabilizer on the back.
Once you’ve gathered the basics, head to the beginner embroidery hub and pick a small first project.


